Goggles Connection - BRP FLINT RADIANT User Manual

C. INSTALLATION
5. Place the cable in the holding
bracket and close the holding
bracket.
6. Hook the cable on the strap
each side of the coiled cable
section. Leave some slack in the
cable for the strap's motion.
7. Hook the RCA connector on
the strap, cable side first.
8. Install the nose guard.

• GOGGLES CONNECTION

1. Take the goggles side of the
power cable. Sides are written on the
regulator.
2. Connect the power cable's
goggles side in the RCA connector
with the arrow facing up.
3. Lock by rotating a quarter turn
the power cable.
4. Connect the power cable's
source side in the power cable
(vehicle side).
5. Connect the power cable (vehicle side) in the accessory port of the
vehicle
6. Verify the connection with the lit LED light indicator.
8