Nose Guard; Radiant Lens - BRP FLINT RADIANT User Manual

C. INSTALLATION

• NOSE GUARD

REMOVAL
1. Press down firmly on the bridge of
the nose guard with your thumbs
while holding the bottom of the
goggles.
INSTALLATION
1. Align the 3 inserts with the goggles' matching holes.
2. Press firmly on the nose guard's
sides with your fingers while holding
the top of the googles with your
thumbs.

• RADIANT LENS

REMOVAL
1. Remove the nose guard.
2. Unhook the RCA connector
from the strap. Start with the
bottom of the RCA connector.
3. Unhook the cable from the
strap.
4. Open holding bracket to
unhook the cable.
5. Pull on the top and bottom of
the goggles from the inside to
unhook the top of the lens.
6. Pull the top of the lens on top
of the goggles' branch and pull
the top of the lens to unhook the
bottom.
6