BRP FLINT RADIANT User Manual page 10

C. INSTALLATION
If your jacket is equipped with cable passes-through, route the power
cable (goggles side) and power cable (vehicle side) in your riding coat as
shown below:
WARNING
The goggles use a regulator which becomes HOT when connected. Do
not put in direct contact with skin. Make sure to have a piece of fabric
between regulator and skin.
Never use petroleum based chemicals, solvents, gasoline, cleaning
agents or adhesives to clean the goggles and all its components as they
may be seriously damaged by the use of such products.
Please take note that scratches to the lens once worn are considered
normal wear and tear and will not be considered for warranty
replacement or credit.
NOTICE
9