Table of Contents
Advertisement
C. INSTALLATION
7. Pull in the center of the lens
to unhook the nose area.
8. Pull the cable from under the
branch to the lens' side.
9. Pass the RCA connector
under the branch. Cable side
first.
INSTALLATION RADIANT LENS
1. Pass the RCA connector under
the branch. Cable side first.
2. Slide the lens' left side in its
place.
3. Slide the lens' right side (cable
side) in its place.
4. Clip goggles' nose area on
lens. Make sure the lens is in the
nose's slit.
7
Advertisement
Table of Contents
