Assembling Of Switch/ Sensor - Makita DMP180 Repair Manual

4-3-2

Assembling of Switch/ Sensor

[2]
[1]
[2]
[5]
[4]
[1]
Fig.14
[1]
Fig.15
[1]
[3]
Fig.16
[3]
[2]
1
Assemble Power on/ off [1] so that the red switch
[2]
side faces to the yellow arrow side, then tighten
Screws 3*10 [2] (2 pcs).
2
Assemble Switch [1] into two bosses.
3
Assemble Digital display [2] and LED PCB [3].
4
Tighten SCREW 3*10 [5] carefully so as not to
pinch Lead wires with Trigger spring-fixed block
[4].
5
With Spring [2] putting into Switch trigger [1],
align Spring [2] with the cylindrical portion of
Trigger spring-fixed block [3], then assemble
Switch trigger [1].
8 / 9