Installation
Adjusting the Projected Image
Adjusting the Projector's Height
The projector is equipped with elevator feet for adjust-
ing the image height.
To raise the image:
1. Press the elevator button
2. Raise the image to the desired height angle
release the button to lock the elevator feet into posi-
tion.
3. Use screw in feet
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in feet
1
Elevator Button
.
to fine-tune the display angle.
to fine-tune the display angle.
2
Elevator Feet
, then
3
Tilt-Adjustment
Feet
15
English