Led Indicators - ViewSonic LS710HD User Manual

LED Indicators

When the warning indicators (see below) light up or flash, the projector will
automatically shutdown. Unplug the power cord from the projector, wait for 30
seconds and try again. If the warning indicators light up or flash, please contact
your nearest service center for assistance.
Status and
Description
Standby State
(Power cord
input)
Power On
(Warming)
Power On and
Lamp Lighting
Power Off
(Cooling)
Quick Resume
(100 secs)
Error
(Lamp failure)
Error
(Fan failure)
Error
(Overheat)
Power Indicator Light
Red
Steady Light
(0.5 sec off/0.5
Steady Light
(0.5 sec off/0.5
Back to red
steady light
off/0.25 sec on)
Flashing
Flashing
Flashing
Temperature
Indicator Light
Blue
Flashing
sec on)
Flashing
sec on)
when the
cooling fan
turns off.
Flashing
(0.25 sec
Steady Light
67
Light Source
Indicator Light
Red
Steady Light
Flashing
Red