Led Indicators - ViewSonic LS7 Series User Manual

LED Indicators

When the warning indicators (see below) light up or flash, the projector will
automatically shutdown. Unplug the power cord from the projector, wait for 30
seconds and try again. If the warning indicators light up or flash, please contact
your nearest service center for assistance.
Status and
Description
Standby State
(Power cord
input)
Power On
(Warming)
Power On and
Lamp Lighting
Power Off
(Cooling)
Error
(Lamp failure)
Error
(Fan failure)
Error
(Overheating)
Power Indicator Light
Red
Steady Light
Flashing Light
(0.5 sec. off/0.5
Steady Light
Flashing Light
(0.5 sec. off/0.5
back to steady
red light when
cooling fans
Flashing Light
Flashing Light
Flashing Light
Temperature
Indicator
Blue
sec. light)
sec. light);
turn off
Flashing Light
Steady Light
56
Light Source
Indicator
Light Light
Red
Steady Light
Red