Advertisement
N68-22 Cabinet Installation Guide
3.1 Unpacking the Cases and Checking the Items
This section describes how to unpack the cases and check the items in the cases to facilitate
subsequent cabinet installation.
Prerequisites
l
l
Context
l
l
Procedure
Step 1 Unload the cases.
When unloading the cases, you should place the cases in sequence. Ensure that the labels on the
cases face the same direction.
Step 2 Check whether the number of cases on site matches the Packing List and whether the place of
delivery is the same as the actual installation place.
If...
The number of cases on site matches that in the Packing List
The number of cases on site does not match that in the Packing List
Step 3 Check the shockwatch labels on both sides of each case to determine whether each case has been
hit.
If...
Both labels on a case are transparent, as
shown by part 1 in
Issue 01 (2013-01-30)
Site preparation for the installation is complete.
The cases that contain the cabinets and components are delivered to the site.
When carrying or placing the equipment, you should ensure that it does not collide with
doors, walls, shelves, or other objects.
When transporting or installing the equipment, components, or parts, you should avoid
touching their uncoated metal surfaces with sweaty or dirty gloves.
CAUTION
Figure 3-1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Preparing for the N68E-22 Cabinet Installation
Then...
The case has not been hit. Go to
Then...
Go to
Step
3.
Go to
Step
4.
Step
5.
7
Advertisement
