Trouble Shooting - Hasbro TIGER ELECTRONICS i-Cubie Instruction Manual

TROUBLE SHOOTING

Problem:
i-Cybie will not respond to any buttons.
Solution:
A. i-Cybie may be asleep. If he is asleep please wake him up by pressing his head button
for 5 seconds
B. i-Cybie's battery need to be re-charged. Follow the instructions in this manual to
re-charge his battery.
Problem:
i-Cybie will not respond to voice commands.
Solution:
Either he is not listening when the command is being given OR the room is too loud for i-Cybie
to be able to hear properly. Please see the section for giving Voice Commands to make sure
he is able to listen.
Problem:
If i-Cybie's leg gets jammed it may make a clicking sound for 3 seconds.
Solution: If i-Cybie's leg keep clicking and he is unable to free himself, pause him by pressing
the Large Button and free his legs from the awkward position, reset him, or remove his battery.
Handling and storing of charger and battery
1. Use only chargers approved by Tiger Electronics. Use of any other battery charger with
i-Cybie will invalidate any approval given to i-Cybie and may be dangerous.
2. Make sure the battery is fully recharged before use.
3. Your i-Cybie is powered by a NiCd rechargeable battery. The battery is not charged
before shipment, even though there might be enough power to turn the i-Cybie on.
4. Do not attempt to discharge the battery by shorting the battery terminal or any other means.
5. Leaving the battery in hot or cold places, such as in a closed car in summer or winter
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C. Your i-Cybie with a hot or cold battery may temporarily not work,
even when the battery is fully charged. NiCd batteries performance is particularly limited in
temperatures below -20°C.
43
Do not abuse i-Cybie
Things i-Cybie hates
If a leg jams, please help me
by moving me or reset!
More things he hates
44
US