Advertisement
4) After striking a foreign object;
5) Whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the
disabling device or removable battery) before carrying out maintenance or cleaning work.
b) Use only the manufacturer's recommended replacement parts and accessories.
c) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized
repairer.
d) When not in use, store the machine out of the reach of children.
Recommendation
The machine should be supplied via a residual current device (RCD) with a tripping current of not
more than 30 mA.
Never allow children, persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar with these instructions to use the machine, local
regulations may restrict the age of the operator.
Additional instructions
This product must be and operated by experienced users only. It is important that non experienced
users get a full training before using this tool
If you give this machine to another person, please also provide it with this instruction manual.
Read all markings marked on this tool (symbols, technical data, warnings, etc.). The symbols on
the tools are explained in the manual.
Use this machine as described in this instruction manual. It is strictly forbidden to use this tool for
applications other than those described in this manual.
Failure to follow these instructions can result in serious injury and, in some cases, death.
This product is intended for private domestic use only. Do not use it for commercial purposes.
Never let people unfamiliar with these instructions or children use this product.
National regulations may limit the use of the machine. People under the age of 18 must not use this
product.
Keep in mind that the operator or user is responsible for accidents or risks to other persons or their
property.
Do not use the tool if you are drunk, tired, under the influence of drugs or ill. Do not use the tool if
you are not in an adequate physical condition.
This tool is intended for outdoor use. Never use it indoors.
Keep people and animals away from the work area. Children and people who do not know how to
use this tool must not touch it and handle it.
Keep bystanders at least 15 m from the machine during operation.
Use the product only under daylight or under good artificial light.
Do not use the tool during bad weather conditions (lighting, rain, storm, big winds, etc.)
Do not use the tool in an area where ventilation is poor.
Do not use the tool in damp locations.
Do not use the tool in the presence of flammable liquids or gases.
Do not operate the product with damaged guards or shields in place.
Keep hands and feet far from the blade at all times and especially when turning the appliance off
and on.
Do not force the tool.
Use only the accessories supplied or recommended by the manufacturer. Use of other accessories
may result in an accident. Ask your dealer for advice.
Do not lean. Keep a good balance at all times.
Keep handles dry, clean and free from oil and grease.
Use and handle the machine carefully; the cutting tools must keep sharped and cleaned for better
and safer performance. Follow the instructions in this manual to lubricate and change accessories.
6
Advertisement
