Powering On/Off The Projector; Powering On The Projector - Optoma EP761 Manual

Installation
 Turn on the
projector first and
then select the
signal sources.
6
English

Powering On/Off the Projector

Powering On the Projector

1. Open the lens door. 
2. Ensure that the power cord and signal cable are securely
connected.  The Power LED will be Amber.
3. Turn on the lamp by pressing "Power/Standby" button
either on the top of the projector or on the remote. The
Power LED will flash green.
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you can select your
preferred language from quick menu after the startup screen
display.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, press the

"Source" button on the control panel or direct source key on
the remote control to switch between inputs.
Power/Standby
2
Power LED
Lens Door
1