Putting Into Operation - PROFECO 77457 Instruction Manual

Putting into operation

Observe the mains voltage: The voltage of the power source must correspond to the
value indicated on the type plate of the device. Extension cords must have a core
2
cross section of at least 2x1.5mm .
Switching on:
Set the switch to Ⅰ or Ⅱ, depending on the application.
Switching off:
Set the switch to 0.
Meaning of crossed-out wheeled bin:
Do not dispose of electrical appliances as unsorted municipal waste, but use
separate collection facilities.
Contact your local authority for information on available collection systems.
When electrical appliances are dumped in landfills or dumps, hazardous substances
can leak into groundwater and enter the food chain, damaging your health and well-
being.
10