Teletext - JVC InteriArt LT-20E50SJ Instructions Manual

Teletext

Teletext is an information system that displays
text on your TV screen. Using the Teletext in-
formation system you can view a page of in-
formation on a subject that is available in the
list of contents (index).
On screen display is not available in text mode.
Contrast, brightness or colour control is not
available, but volume control is available in
text mode.
To operate Teletext
• Select a TV station on which Teletext is being
transmitted.
• Press (TELETEXT) “
list of contents (index) is displayed on the
screen.
UPQÃH@IV
To select a page of Teletext
• Press the appropriate digit buttons for the
required Teletext page number.
The selected page number is displayed at the
top left corner of the screen. The Teletext page
counter searches until the selected page
number is located, so that the desired page is
displayed on the screen.
• Press “ ” button to move the Teletext
screen forward one page at a time.
• Press “ ” button to move the Teletext
screen backward one page at a time.
To Select Index Page
• To select the page number of the index (gen-
erally page 100), press “
Searching for a teletext page while
watching TV
• In the Teletext mode pressing “
will switch the screen to the TV mode. In the
TV mode enter a page number using digit
” button. Usually the
“ button.
“ button
ENGLISH - 23 -
buttons. As you enter last digit of page num-
ber, “ ” sign will replace the page number
and flash until the entered page number is
found. Then the page number will replace
“ ” sign again. Now you can display this
teletext page pressing “
To Select Double Height Text
• Press “ “ button for the top half of the infor-
mation page to be displayed in double height
text.
• Press “ “ button again for the bottom half
of the information page to be displayed in
double height text.
• Press “ “ button once more for the full page
of normal height text.
To Reveal “concealed”
Information
• Pressing “ “ button once will reveal an-
swers on a quiz or games page.
• Pressing “ “ button again will conceal the
revealed answers.
To Stop Automatic Page Change
The teletext page you have selected may con-
tain more information than what is on the
screen; the rest of the information will be dis-
played after a period of time.
• Press “ “ button to stop the automatic page
change.
• Press “ “ button again to allow the next
page to be displayed.
To Select a Subcode Page
Subcode pages are subsections of long Tele-
text pages that can only be displayed on the
screen one section at a time.
• Select the required Teletext page.
• Press “ “ button.
• Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
• If the selected subcode page is not displayed
in a short time, press “
programme will be displayed on the screen.
“ button.
“ button. TV