JVC InteriArt LT-20E50SJ Instructions Manual page 24

PC Picture Menu
In the Main menu, select “PC Picture” using
“ “ or “ ” button, then enter the PC Picture
menu pressing “ “ / “ ” or “OK” buttons.
Contrast, Bright-1 and Colour Temp. adjust-
ments in this menu are identical to adjust-
ments defined in TV picture menu.
R, G, and B adjust the TV image colour in PC
mode. You can change the TV colour to your
desired colour: R (Red), G (Green), B (Blue)
Press the BLUE button to reset the PC picture
settings to default factory settings.
Sound Menu
In the main menu select “Sound” using “
or “ ” button then enter the Sound menu
pressing “ “ / “ ” or “OK” buttons.
The items in this menu are described at
Sound menu starting
PIP Picture
In the Main menu, select “PIP Picture” using
“ “ or “ ” button, then enter the PIP Picture
menu pressing “ “ / “ ” or “OK” buttons.
This menu is displayed when PIP is displayed
on the screen and otherwise “PIP No Signal”
message will be displayed at the bottom of
menu.
PIP picture is displayed on the screen with
“ ” button. By pressing “OK” button, PIP
window is selected. PIP position is changed
page 16.
ENGLISH - 23 -
by “ ” button. There are four different PIP
positions. PIP size is changed by “
ton. Two different PIP size are available.
Programme in the PIP window is increased /
decreased by “
AV button. All EXT modes (Except EXT-3) are
also available in PIP window. PIP window is
removed from the screen by “
Press the BLUE button to reset the PIP picture
settings to default factory settings.
The items in this menu are described at Pic-
ture menu starting
Source Menu
In the Main menu, select “Source” using “
or “ ” button, then enter the Source menu
pressing “ “ / “ ” or “OK” buttons.
“
Select the available sources of TV, EXT-1,
EXT-2, EXT-2 S, EXT-3, EXT-4, EXT-4 S or PC
using “ “ or “
/ “ ” or “OK” buttons.
Sound in PC mode
• Connect the PC’s Audio output to the TV’s PC
Audio In socket with an audio cable.
• On your remote control,using “ ” button to
select sound source from TV, EXT-1,
EXT-2, EXT-3, EXT-4 and PC options.
• When PIP is displayed on the screen, “ ”
allows you to switch sound between PC and
selected PIP source.
/ ” , digit buttons or
” button.
page 14.
” button and by pressing “ “
“ but-
“