Switching The Tv On/Off - JVC InteriArt LT-20E50SJ Instructions Manual

the TV out socket located at the devices (VCR,
DVB etc.) to this socket as well.
UWÃS@6SÃQ6I@G
How to connect other devices
IMPORTANT: Switch off the TV before connect-
ing any external device.
Sockets for external connections are at the
back of the TV. For connection of other devices
via Euroconnector refer to the manuals of the
related devices.
Inserting batteries in the remote
control handset
• Remove the battery cover located on the back
of the handset by gently pulling upwards from
the indicated part.
• Insert two AA/R6 dry cell or equivalent type of
batteries inside.
• Replace the battery cover.
NOTE: Remove the batteries from remote con-
trol handset when it is not to be used for a long
period.Otherwise it can be damaged due to
any leakage of battery.
Old batteries must be disposed in a desig-
nated area. If performance of the remote con-
867G@ÃUWÃ
ENGLISH - 11 -
trol reduces, replace the batteries with the cor-
rect type. Do not combine a used, old battery
or a new one or mixed battery types. Remove
dead batteries immediately to prevent acid
from leaking into the battery compartment.

Switching the TV ON/OFF

To switch the TV on
Your TV will switch on in two steps:
1- Connect the mains plug to the system.
Press the main power button on the top of
the TV, then the TV will switch to the last
programme (or EXT mode) that it was
switched off and the power lamp becomes
green.
2- To switch on the TV from stand-by mode
either:
Press the “ / I” button on the remote control
or.
Press a digit button on the remote control so
that a programme number is selected,
or,
Press “ ” or “
control, so that last switched off programme
is selected.
Either way the TV will switch on and the power
lamp will become green.
To switch the TV off
• Press the “ / I” button on the remote con-
trol, so the TV will switch to stand-by mode
and the power lamp will become red.
NOTE: When you turn on the TV for the first
time, pressing the main power button turns
the TV on and the first APS menu appears.
See page 12 for the Initial Settings.To switch
the TV off completely, press the main power
button and withdraw the mains plug.
” buttons on the remote