Preparation; Before Switching On Your Tv - JVC InteriArt LT-20E50SJ Instructions Manual

Preparation

Install Display on solid horizontal surface such
as a table or desk.
For ventilation, leave a space of at least 10 cm
free all around the set. To prevent any fault
and unsafe situations, please do not place
any objects on top of the set.
Features
• It is a remote controlled colour television and
PC monitor.
• 100 programmes from VHF, UHF bands or
cable channels can be preset.
• It can tune cable channels.
• Controlling the TV is very easy by its menu
driven system.
• It has 2 pieces of Euroconnector socket for
external devices (such as video, video
games, audio set, etc.)
• To use as a PC monitor, 15 Pin Mini D-Sub
connector for computer.
• Optional stereo sound systems (German or
German+Nicam) are available.
• Multilanguage OSD.
• Teletext (Fastext, 7 pages).
• It is possible to connect headphone.
• A.P.S. (Automatic programming system)
• All programmes can be named.
• Forward or backward automatic tuning.
• Sleep timer.
• Child lock
• Auto, 4:3, 16:9
• Automatic sound mute when no transmis-
sion.
• When no valid signal is detected, after 5 min-
utes the TV switches itself automatically to
stand-by mode.
• NTSC Playback.
• Universal power supply range is a standard
feature on this model.
• TV Picture in PC (if PC input available).
• PLL (Channel Search)
• PC input (Support Up to 1024 x 768)
Panel Features
• High resolution (800 x 600), 20” TFT LCD
display.
• High contrast ratio (500:1 Typical)
• Brightness: 500 cd/m
• High-speed response time < 16 msec.
• Wide viewing angle (typical) 160° (horizon-
tal) and 120° (vertical).
• 8-bit colour depth, display 16.7 M colours.

Before Switching on your TV

Power connection
Only use the adaptor supplied with this prod-
uct.
IMPORTANT: The TV set is designed to oper-
ate on 12 V DC. For this, an adaptor is used
which gives 12V DC voltage. Connect this
adaptor to a system that supplies 100 -240V
AC, 50/60 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you con-
nect the set to the mains.
Connections to the RF input
socket
• Connect the aerial or cable TV plug to the RF
input socket located at the back of the TV
and connect the cable plug coming out from
ENGLISH - 9 -
2.