Train-Tech LK1 Quick Start Manual

Track Tester
• Quickly checks track for power faults
• Small & Larger Versions - for N gauge to G gauge!
• Multicolour LED Indicates the DC polarity, or DCC, or a fault
Buffer Lights
• Realistic stop light for any siding - fits most buffer stops
• Simply clips onto track – No wires!
• On DCC both lights are on constantly
• On DC one light is on & varies with speed
DCC Fitted Digital Signals
• Signal with DCC decoder built in - No CV programming
• Easy to fit and use - can just plug direct into track – no wires!
• Wide range available - also available with Feathers and Theatres
One-Touch DCC Point Controllers
™
• Control points and uncouplers using DCC
• Work with most solenoid point motors - Built in CDU
• Just connect 2 wires to DCC rails - No CV Programming!
• Easy screw terminals – no soldering
LFX Lighting Effect Controllers
• Easy way to add lighting effects to your layout
• Wires screw in – no resistors or soldering - LEDs included
• Powered by 9v battery, 8-16V DC or DCC
• On DC the effect is on when powered - On DCC it can be controlled
Level Crossing - Ready Assembled
• Power from 9-16v DC, DCC or a 9v battery - available in single & pairs
• Light and sound - all connections easy push fit
• Includes 2 x Peco static level crossing barriers
• Can be turned on automatically using a Track Sensor
Traffic Lights - Ready Assembled
• Power from 9-16v DC, DCC or 9v battery - 2 Wire connection
• Realistic standard UK sequence and timing varies randomly
• Fully assembled - drill hole in baseboard & connect to power
Track Sensor
• Trigger level crossings and change semaphore signals
• Power from 12-16v smooth DC or DCC
• Can be used to trigger Sound Track, Smart Screen, Relays
• Four outputs for direct connection to LEDs for occupancy, FX
Mimic Switches & Lights
• Make a mimic panel to control Layout Link items - Single wire to control
• Link to Track Sensors or Sensor Signals and LEDs show occupancy & signal status
• Link to Sensor Signals to manually override and switch route indicators on/off
Smart Lights - Easy to fit Lighting Effects
• Small - Just 1cm x 1cm x 0.3cm with 2 wires
• Power by 9-16v DC, 9v battery, or direct to DCC which can control some effects
• Just connect and go - no setting up required
• Disco / Emergency / Real Fire / TV / Welding / Random / Programmable
Automatic Tail, Firebox & Loco Lights
• No switch - senses motion & turns on!
• Turns off automatically 4 minutes after stopping
• No pickups, wires or soldering - LED just plugs in
• Fit in brake vans, coaches, loco, wagons etc
• Runs for ages on 2032 button battery - LEDs & battery included
Sound for your layout
• Sound capsule with no wires - runs from a battery - built in speaker
SFX Sound
• No connections to track so work with both DC & DCC
• Motion activated - switches on when train moves! Real Sounds!
• Tiny - 25mm x 20mm x 12mm - N gauge fitting guide available
• Record your own sounds and play them back on your layout!
Sound Track
• Record 4 tracks upto 35 seconds each - Lock to protect favoutires
• Portable - use with 9v battery to take out & record sounds
• Power from DC or DCC - Use Track Sensors or DCC to trigger sounds
• Background sounds for your layout - built in speaker & volume
Scenic Sounds
• Power from DC or DCC - on DCC sounds can be triggered
• Lineside • Station Steam • Station Modern • Urban • Rural
Signal Kits
DC &
DCC
Every kit includes the
signal head, aluminium
post & base plus
detailing kit
• Low cost – adapt to your own design
• Control by switches or signal controller
• LEDs are prefitted to a narrow PCB
• Ground signals - modern & original
• Feather & Theatre kits available
• Signal Head only for gantries etc
Signal Controllers
• DCC Signal Controllers - Wire in any LED signals to control from DCC accessory address
• Automatic Signal Controllers - Make any LED signal kit into an Automatic Signal!
• Dapol Semaphore Controllers - Control Dapol Semaphores by DCC or automatically
DC & O & G
Gauge
DCC
O
WIRE DC &
Gauge
FREE DCC
DCC
DC &
DCC
DC &
DCC
DC &
AUTO
DCC
DC &
AUTO
DCC
OO
HO
LK1 Left Feather kit
DC &
DCC
OO N Automatic Sensor Signals
Gauge
HO
OO N
Automatic Coach Lighting
HO Gauge
WIRE OO
FREE HO
Servo Controller
• Controls standard radio control servo from DCC, Track Sensor or Mimic switch
• Ideal for animating Level Crossing barriers / gates, Slow points or signals, Coal hopper
• Easy to wire and set up - connects directly to DCC or 8-16 volts smooth DC supply
ANY
DCC
GAUGE Relay Controller
• Two channel Relay unit which can be controlled by Track Sensor, Sensor Signal or DCC
• Enables remote control of motors, solenoids, lamps etc
• Incorporates two heavy duty relays with changeover contacts rated at 8-24 volts at 3 A
Automatic Train Control
DC & ANY
DCC
GAUGE
• Link Sensor Signals to Relay Controller for automatic trains which stop at red lights!
• Can be used on DC or DCC Layouts
• Easy wiring: Sensor Signal link with one wire and Isolated braking section two wires.
• Also supports ABC fitted DCC Loco's for gradual slow down and speed up with sound
Tools, LEDs & Accessories
OO N
Gauge
HO
• We offer a range of LED packs, battery holders, wire, switches & terminals
Smart Lights - Easy to fit Lighting Effects
• Also handy modelling tools including precision cutters, drill bits & spare batteries
Smart Screen
• Real working animated screen - customise with your messages
DC & OO
DCC HO
• Use DCC to program - then can be run on DC or DCC
• Trigger messages with DCC, swtiches, track sensors or just cycle
• Message can change with direction of train on both DC & DCC
• Display upto 10 different messages - can also show real time clock
• Range of enclosure available - Programming service available
OO N
• Small - w 31mm x h 9.5mm x d 4.5mm
Gauge
HO
• Stationary top line - bottom line automatically scrolls
SEE WWW.TRAIN-TECH.COM OR ASK FOR FREE COLOUR BROCHURE
+
DC & ANY
DCC GAUGE
DC & ANY
DCC GAUGE
WIRE ANY
FREE GAUGE
WIRE ANY
FREE GAUGE
ANY
AUTO
GAUGE
See our website, your local model shop or contact us for a free colour brochure
DCP Microdevelopments, Bryon Court, Bow Street, Great Ellingham, NR17 1JB, UK
1119
Telephone 01953 457800 • email sales@dcpmicro.com • www.dcpexpress.com
• Detects train and changes signal automatically to red
• Used own & signal changes back to green after train short time
• Or link to other Sensor Signals for fully automatic block signalling
• Can be used on both DC & DCC - Feather & Theatre versions
• Easy to fit - no wiring or switch - senses motion & turns on!
• Turns off automatically - fits most coaches - may be cut down
• No pickups or wires so works on regular DC & DCC
• Traditional warm white or modern cool white
• Also with tail light, sparking, door beeps and door light effects
LK1: Left Feather add-on kit
• Add feather to an existing OO/HO gauge signal
• Assembled PCB with 5 white LEDs fitted
• Includes front and rear ABS plastic covers
• Complete with 1K resistor for 12-16V DC
• Control by switch, point switch or DCC decoder
• Note this kit requires gluing and soldering
• Signals with prefitted feathers also available
www.Train-Tech.com
WIRE DC & OO
FREE DCC HO
DC & WIRE OO N
AUTO
Gauge
DCC FREE HO
DC & ANY
DCC GAUGE
DC &
ANY
DCC GAUGE
DC &
ANY
DCC GAUGE
ANY
GAUGE
DC & OO
DCC HO