Remote Control Unit - JVC Compact VHS GR-AX460 Instructions Manual

The transmitted beam may not be effective or
may cause misoperations when the remote
sensor is directly exposed to sunlight or
powerful lighting.
Downloaded from: https://www.usersmanualguide.com/
Infrared beam
effective area
10°
Remote sensor
10°
1
3
4
5
6
7
8
9
Buttons
With the camcorder's power switch set to
"CAMERA".
1
PAUSE IN connector
2
Infrared beam Transmits the beam signal.
transmitting window
3
MBR SET button
4
INT. TIME button Self-Timer/Time lapse (
5
REC TIME button Animation/Time lapse (
6
FF button Retake (Forward) (
7
REW button Retake (Rewind) (
8
PAUSE button
9
PLAY button
0
START/STOP button Functions same as the Recording Start/Stop button of the camcorder.
!
VISS button Index code marking (
@
ZOOM (T/W) button Zoom (invariable speed) (
#
VCR CTL button
$
A. DUB button
%
STOP button
^
INSERT button
&
R. A. EDIT button

Remote Control Unit

The RM-V704U Full-Function Remote Control Unit can
operate this camcorder from a distance as well as the
basic operations (PLAY, STOP, PAUSE, FF, and REW) of
your VCR. This remote control unit makes additional
recording functions possible. To operate, point it at the
camcorder's remote sensor. The RM-V704U is provided
with GR-AX460, and is available optionally for
GR-AX360/AX260.
PULL OUT BATTERY HOLDER
1
Pull out the battery holder according to the type of
remote control unit you have.
Type A : Pull out the battrery holder while sliding
the lock hole.
Type B : Pinch the release tab and pull out the
battery holder.
2
INSERT BATTERY
0
2
Insert the lithium battery* (CR2025), with its plus (+)
side up, into the battery holder.
!
REPLACE BATTERY HOLDER
@ 3
Replace the battery holder until it clicks in place.
*Read warning on lithium battery. (
#
$
A
%
^
&
Lock hole
Functions
With the camcorder's power switch set to
"PLAY".
— pg. 32
— pg. 31
pg. 24, 25)
pg. 25)
pg. 11) FF/FF Shuttle Search (
pg. 11) Rew/Rew Shuttle Search (
— Pause (
— Playback start (
pg. 12)
pg. 11)
— pg. 31
— Audio dubbing (
— Stop (
— Insert Editing (
— pg. 32
9
pg. 2)
B
Release tab
—
—
pg. 28)
pg. 28)
pg. 29)
pg. 28)
—
—
pg. 35)
pg. 28)
pg. 34)