Table of Contents
Advertisement
Date display
Character Generator
Date-off mode
Date/Time display
NOTES:
● In the On-Screen Display mode, the date is
● The on-screen display is not available during recording.
Downloaded from:
https://www.usersmanualguide.com/
F1 button
F1
SEL
F2
Function SEL. button
TITLE
F1
Auto Date Record mode
Date/Time display
On-screen display
Date display
Auto Date Record mode
25.12.96
AUTO DATE
Auto date
Auto date
record executed
record mode
Character Generator
25.12.96 10:50
SET CHAR
IN PARIS, FRANCE
No Characters
Example of
stored
stored characters
displayed and recorded.
Date/Time Character Insert
F2 button
This feature allows you to display date, time and characters
in your viewfinder and on a connected colour monitor,
record them manually or automatically, and even make
your own titles.
NOTE:
You should already have performed the Date/Time Setting
procedure (
pg. 6). If you haven't, do so before continuing.
DISPLAY
SELECT DISPLAY
1
Press Function SEL. until "DISP." appears to the right
of F2.
CHOOSE DISPLAY MODE
2
Press F2 while in Record–Standby to cycle through
the modes as shown in the illustration at left.
DISP.
F2
NOTES:
● The selected display can be recorded.
● If you don't want to record the display, select Date-off mode
before shooting.
● If you want to delete the display during shooting, press F2.
● If you want to call back a deleted display, engage the Record–
Standby mode and then select the desired display mode using F2.
AUTO DATE RECORD
Your camcorder automatically records the day, month
and year for about 5 seconds after recording is initiated
in the following situations:
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by pressing
F2. In this mode, the month, day and year are replaced
after 5 seconds with "AUTO DATE".
25.12.96
NOTES:
● Setting PROGRAM AE to LOCK always engages this mode, and
disables all other modes.
● In the Auto Date Record mode, if the date changes while you're
shooting, the date indication is recorded for about 5 seconds
from that point. It is not recorded during any other recordings
made on that day.
ON-SCREEN DISPLAY
CONNECT CAMCORDER TO
MONITOR
1
Connect the camcorder to a monitor as instructed in
"BASIC CONNECTIONS" (
DISPLAY VIEWFINDER
INDICATIONS
2
Press F2 until the indications appear on the
connected monitor.
21
pg. 27).
Advertisement
Table of Contents
