Locking Or Unlocking - Huawei WATCH GT Cyber User Manual

a protective film to the rear of the watch. The rear cover of the watch has sensors that can
identify signals from the human body. If the sensors are blocked, the identification will be
inaccurate or fail and the watch will not be able to accurately record the heart rate, SpO2,
and sleep data.
To ensure the accuracy of measurements, avoid wearing the strap more than one finger
width away from your wrist bone. Ensure that the strap is worn relatively tightly and ensure
it is secure during workouts.
The watch is made of materials that are safe to use. If you experience skin discomfort
when wearing the device, take it off and consult a doctor.

Locking or unlocking

You can set a PIN on the device to bolster your privacy. After you have set a PIN and enabled
Auto-lock, you will need to enter the PIN to unlock the device and enter the home screen. If
you keep wearing your device, the screen will not be locked.
Setting a PIN
1
Set a PIN: Swipe down on the watch's home screen, go to Settings > PIN > Set PIN, and
follow the onscreen instructions to set a 6-digit PIN.
2
Enable Auto-lock: Swipe down on the watch's home screen, go to Settings > PIN, and
enable Auto-lock.
If you forget the PIN, you will be required to restore the device to its factory settings.
Changing the PIN
Swipe down on the device's home screen, go to Settings > PIN > Change PIN, and follow the
onscreen instructions to change the PIN.
Disabling the PIN
Swipe down on the device's home screen, go to Settings > PIN > Disable PIN, and follow the
onscreen instructions to disable the PIN.
Forgot the PIN
If you have forgotten the PIN, restore the device to its factory settings and try again.
Getting Started
7