Locking or unlocking
You can set a PIN on the device to bolster your privacy. After you have set a PIN and enabled
Auto-lock, you will need to enter the PIN to unlock the device and enter the home screen. If
you keep wearing your device, the screen will not be locked.
Setting a PIN
1
Set a PIN: Swipe down on the watch's home screen, go to Settings > PIN > Set PIN, and
follow the onscreen instructions to set a 6-digit PIN.
2
Enable Auto-lock: Swipe down on the watch's home screen, go to Settings > PIN, and
enable Auto-lock.
If you forget the PIN, you will be required to restore the device to its factory settings.
Changing the PIN
Swipe down on the device's home screen, go to Settings > PIN > Change PIN, and follow the
onscreen instructions to change the PIN.
Disabling the PIN
Swipe down on the device's home screen, go to Settings > PIN > Disable PIN, and follow the
onscreen instructions to disable the PIN.
Forgot the PIN
If you have forgotten the PIN, restore the device to its factory settings and try again.
Open the Huawei Health app, go to the device details screen, and touch Restore factory
settings.
Once you have restored your device to its factory settings, all of your data will be cleared,
so please exercise caution when performing this operation.
Setting grid layout on the home screen
To enable Grid mode on your device, go to Settings > Watch face & launcher > Launcher,
and select Grid.
To enable List mode on your device, select List.
Voice assistant
The wearable device allows you to use the voice assistant to check for information, and
control smart home devices once it is connected to the Huawei Health app on your phone.
Getting Started
7