WALL OVEN
LWD3081ST
CONVECTION ELEMENT
Remove the four screws that secure the
convection fan cover. (This cover takes up
most of the back of the oven cavity.)
Take the cover out of the oven cavity.
WARNING! Be careful to avoid bending or
damaging the fan blade.
Remove the four screws that secure the
convection element.
The element is fragile. Handle it carefully to
avoid damage or breakage.
Pull the element forward into the oven
cavity. Be careful to avoid damaging the
wires on the edges when you pull them
through the hole.
Some terminals may be equipped with a
release tab which must be pressed to
release the connector.
CONVECTION FAN BLADE
Remove the nut securing the fan blade.
(It is a left-hand thread.)
Pull the fan blade off the shaft. Do not lose
the bushing (spacer) or washer.
Be careful to avoid bending the fan blade.
Page 18
TRAINING MANUAL
TRAINING MANUAL