Convection Fan Motor - LG LWD3081ST Training Manual

WALL OVEN
LWD3081ST

CONVECTION FAN MOTOR

Remove the four screws that secure the
convection fan cover. (This cover takes up
most of the back of the oven cavity.)
Take the cover out of the oven cavity.
It is not necessary to remove the
convection element at this time.
WARNING! Be careful to avoid bending or
damaging the fan blade.
Remove the nut securing the fan blade.
(It is a left-hand thread.)
Pull the fan blade off the shaft. Do not lose
the bushing (spacer) or washer.
Be careful to avoid bending the fan blade.
Disconnect the two wire leads from the fan
motor.
The connectors may include a release tab
that must be pressed to remove the lead.
Remove the three screws that secure the
fan motor to the oven body.
Page 25
TRAINING MANUAL
TRAINING MANUAL