Table of Contents
Advertisement
Maintenance
(8-3) Maintenance technical instructions:
Suction bag replacement
Polivac has a sucker which is designed to absorb the produced
particles resulting from polishing. The sucker has 2 bags. The
pollution of these bags reduces the precision of the device and
increases the noise of the motor. Change the bags as soon as
possible:
Unplug the device
1
There are two square lid handles on the device which is
2
easily pulled up.
The bag is in a suspended position. Release it with a screwdriver.
3
Replace the dirty bag. (It is recommended to get bags from
4
the manufacturer company).
Fasten the lid again. Make sure they are placed correctly.
5
Place the anti-dust protector.
6
The device is ready to use.
7
•
It is likely that one side of the device is used more than the
other side, thus, they are separated bags for left and right
sides. This means that sometimes only one bag may need
replacing. Check bags regularly for any leakage or blockage.
•
Don't try to clean the bags. Always use new bags.
•
It is recommended no to empty the bag filling because polluted
substances are likely stuck to the bag cloth which reduces
device efficiency.
28
Fig-6
Placing the bag on the devi
Advertisement
Table of Contents
