Poli Vac Polish Device Contents Section 1- Introduction (1-1) How to use the manual (1-2) Terminology and signs Section 2- General information (2-1) Company’s liabilities (2-2) Guarantee Section 3- Device introduction (3-1) Main parts Section 4- Technical features (4-1) Technical features...
Page 4
Please impart us with your constructive guidance, so that we can benefit from your comments, recommendations, and gain knowledge about your needs. We hope that you will find using Poli Vac to be an enjoyable and successful experience, Polaris Engineering and Manufacturing...
Introduction (1-1) How to use the manual This manual presents the instructions about use, installation, and maintenance of Polivac device made by Polaris Co. It should be noted that: • The product should be used according to the instructions of this manual.
Poli Vac Polish Device (1-2) Terminology and signs Knowledge of signs meanings is of great importance. A list of signs has been introduced in the following for initial recognition and reference to them if necessary. Danger! Indicates compulsory warnings. Warning! Indicates functional recommendations.
Poli Vac Polish Device (2-1) Company liabilities Polaris is not liable for any problem involving the following: Failure to follow the instructions of this manual (incorrect use of the product), repair by an unauthorized person and part replacement without coordination with the after-sales service department, failure due to power fluctuations.
Page 10
General Information • Authorized representatives of Polaris Co. These persons are endorsed by the company to work on the device under any operational circumstances. They are also authorized to do any electrical and mechanical adjustment/ repair, maintenance program and authorized parts replacement.
Production Introduction (3-1) Main parts Polivac is a polisher device with a suction section and other functional parts and a safety section which complies with standards. This device is usually used to polish and cut small parts used in dental prosthesis. Main parts of Polivac are as follows: Key A (ON/OFF) Brush holder...
The most recent design and manufacturing methodologies are employed to increase the lifetime and quality of products. (4-2) Technical details Technical specifications of the Poli VAC are given in Table 1: Power supply 220 V-50/60 Hz Height...
The device should remain in a vertical position during movement. For more safety and prevention of any injury due to neglecting the technical details, refer to section 4-2. Failure to comply with any of the stated activities, will damage the device and Polaris will have no responsi- bility.
Poli Vac Polish Device (5-3) environmental circumstances It is important to choose an appropriate environment during installation and operation for personal safety, correct opera- tion and long lifetime. This environment not only should be big enough but also should be on enough, have proper ventila- tion and should be kept away from dust and direct sunlight.
If the surface or legs of the table is metal and is in contact with Earth, There will be a risk of electric shock. Therefore, place the Poli VAC on the wooden or fiberglass. Polivac should not be exposed to sunlight directly.
Page 19
Poli Vac Polish Device • Remember that as soon as the device is turned on, the fraction torque helps these connections become firmer; so, during the start of the device, begin applying force to the brush holder (for instance, rub a test sample).
Page 20
Transportation and installation Fig-3 Installing the brush on the brush holder...
Product Application (6-1) Device start-up Before using the device, put it on a firm, flat and stable surface and follow these steps: Unbox the device carefully. Place the device in an environment free of trembling and heat sources. The place should be well-ventilated. Plug the device into a 220V power supply.
Page 23
Poli Vac Polish Device Fig-4 Key A is being used. Turn on the light and suction of the device using key B (zero: OFF position, one: only light is on, two: both light and suction are on). Fig-5 Key B is being used.
• If you see any flaws in the device operation, stop operating the device immediately, unplug it, and call the after-sales service department of Polaris Co and inform them about that. • Never disassemble the electrical or pneumatic parts. •...
Safety (7-2) Device safety measures Polaris Co. make use of high-quality raw materials for advanced production processes to promote the safety level. Quality control is performed in three stages of input, middle control, and final control through several control stations, a procedure which minimizes error and defects chances.
Maintenance (8-1) Clean-Up Keep the device body clean using a dry cloth. Wet the cloth with little water or a non-greasy solution, if needed (only do this for body cleaning). Users should make sure the device is kept clean and free of dust water and other unexpected solutions.
Poli Vac Polish Device (8-2) periodic maintenance Inspection and periodic cleaning of the device depend on the operation level. It is suggested for the user to inform the com- pany experts about the workflow through consultation after installation and learn the appropriate time for an inspection and periodic cleaning from them.
Maintenance (8-3) Maintenance technical instructions: Suction bag replacement Polivac has a sucker which is designed to absorb the produced particles resulting from polishing. The sucker has 2 bags. The pollution of these bags reduces the precision of the device and increases the noise of the motor.
Page 31
Poli Vac Polish Device Calling the aftersales services Unit of Polaris Co. +49 (0) 21033373500 +49 (0) 21033373550 www.polarisgmbh.com Service@polarisgmbh.com Email...