Table of Contents
Advertisement
Maintenance
(8-1) Clean-Up
Keep the device body clean using a dry cloth. Wet the cloth
with little water or a non-greasy solution, if needed (only do this
for body cleaning).
Users should make sure the device is kept clean and free of
dust water and other unexpected solutions.
Cleaning should be done at the end of each operation and
when the device is on OFF mode and stable
If the user decides that the internal parts need cleaning, he/she
should contact the after-sales service department.
Put the main button on the off position before cleaning
external parts of the device. It is forbidden to clean the
device while it is plugged.
Never use combustible, corrosive, base or toxic solutions
for cleaning the device.
You should wear goggles and masks when using
compressed air. When doing this, No one should be
allowed to stand near the device since there is a danger
of getting hurt by suspended particles.
•
Dust on protective glass and plastic tray should be cleaned
off after each operation.
•
Using a wet cloth with soap and water help clean the device.
•
Change the bag when it is dirty. High noise of the device and
the decreased efficiency of the device are signs of the bag
being dirty.
26
Advertisement
Table of Contents
