Table of Contents
Advertisement
(5-3) environmental circumstances
It is important to choose an appropriate environment during
installation and operation for personal safety, correct opera-
tion and long lifetime. This environment not only should be big
enough but also should be on enough, have proper ventila-
tion and should be kept away from dust and direct sunlight. It
should be noted that the device must be placed in a way, so
that the connections may be managed easily.
Workplace temperature: 0-40oC
Maximum humidity: 75%
The device should not be used in a place where there is
danger of explosion or firing
The light of the place should be high enough so that all
parts of the device can be seen clearly.
The device should never be exposed directly to sunlight
or humidity of rain, etc.
The following should be done before the use of the device:
Polivac has been designed to be put on a stable and firm
1
worktable in parallel with the ground. The stability of all parts
of the worktable should be checked.
Plug the device into the outlet after input power and mains
2
electricity are checked (device working voltage is based on
AC 220 electricity).
Urban single-phase power source must be complied
with the specifications of the device power supply
Poli Vac
Polish Device
15
Advertisement
Table of Contents
