Download Print this page

Connecting Your Speakers - Onkyo TX-SR804 Quick Manual

Onkyo tx-sr804: quick start
Hide thumbs Also See for TX-SR804:

Advertisement

System Hookup
1

Connecting Your Speakers

The AV receiver's positive (+) speaker terminals are
color-coded for easy identification. (The negative (–)
speaker terminals are all black.)
Speaker terminal
Front left
Front right
Center
Surround left
Surround right
Surround back left
Surround back right
The supplied speaker labels are also color-coded and
you should attach them to the positive (+) side of each
speaker cable in accordance with the above table. All
you need to do then is to match the color of each label
to the corresponding speaker terminal.
Connecting Speakers
1
2
3
2
Color
White
Red
Green
Blue
Gray
Brown
Tan
Unscrew the terminal.
Fully insert the bare
wire, making sure
that it's touching the
center of the terminal.
Screw the terminal
tight.
Connecting a Powered Subwoofer
Using a suitable cable, connect the AV receiver's SUB-
WOOFER PRE OUT to an input on your powered sub-
woofer, as shown. If your subwoofer is unpowered and
you're using an external amplifier, connect the SUB-
WOOFER PRE OUT to an input on the amp.
Note:
Make sure the plug is pushed in all the way.
Powered
subwoofer
LINE INPUT
LINE INPUT
Front right
speaker
Center
speaker
Surround
Surround
back right
back left
speaker
speaker
Front left
speaker
Surround
Surround
right
left
speaker
speaker

Advertisement

loading

This manual is also suitable for:

Tx sr804 - av receiver