TX-SR804 This guide shows how to get your AV receiver up and running quickly and smoothly. It shows you how to connect your speakers, DVD player, and TV, and how to use Automatic Speaker Setup. For full details on using the AV receiver, refer to the main instruction manual.
Screw the terminal tight. Connecting a Powered Subwoofer Using a suitable cable, connect the AV receiver’s SUB- WOOFER PRE OUT to an input on your powered sub- woofer, as shown. If your subwoofer is unpowered and you’re using an external amplifier, connect the SUB- WOOFER PRE OUT to an input on the amp.
Page 3
Zone 2. Basic TV Hookup Connection Note: Connection is only necessary if you want to listen to TV programs through the AV receiver. Connect the Power cord and start the Automatic Speaker Setup. ➔ See page 4. DVD player AV receiver Signal flow...
Press the [STANDBY/ON] button on the AV receiver or press the remote controller’s [RECEIVER] button followed by the [ON] button to turn on the AV receiver. Turn on the TV and select the input to which the AV receiver is connected. position Auto Speaker Setup...