Dvd Player - Onkyo TX-SR706 Quick Setup Manual

AV Component Hookup
With an HDMI cable you can send both audio and video with a single cable,
making connecting simple and keeping wires neat.
If you have an HDMI-compatible TV and players, you can connect them
to the AV receiver/AV amplifier with HDMI cables. Digital audio signals received
at HDMI IN input are output by the speakers and headphones connected
to the AV receiver/AV amplifier.
HDMI
Cable/satellite
OUT
Using the HDMI Inputs
If there's no picture on your TV, you'll need to
assign the HDMI inputs as necessary using the
onscreen setup menus.
If you connect your DVD player to the AV
receiver/AV amplifier's HDMI IN 1, and connect
your cable or satellite receiver to HDMI IN 3,
as shown above, it's not necessary to change
the default assignments.
TV
HDMI
IN
HDMI
OUT

DVD player

Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
Antenna input
(e.g., RF IN) please refer to the
instruction manual.
On the front panel
MENU
1. Input Assign
TUNING 2. Speaker Setup
PRESET
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Lock Setup
SETUP ENTER
1. Input Assign
1. HDMI Input
2. Component Video Input
3. Digital Audio Input
1–1. HDMI Input
DVD HDMI 1
VCR/DVR HDMI 2
CBL/SAT HDMI 3
GAME/TV HDMI 4
AUX - - - - -
If your TV or player doesn't support HDMI, use the analog or digital
connections shown below.
IF NO HDMI
DVD player
DIGITAL AUDIO VIDEO
OUT OUT OUT
COAXIAL L
R
COAXIAL
DIGITAL VIDEO
OUT
Using the Digital Inputs
If there's no sound, you'll need to assign the
digital inputs as necessary using the setup
menus on the AV receiver/AV amplifier's display.
If you connect your DVD player to the AV
receiver/AV amplifier's DIGITAL COAXIAL IN 1,
and your cable/satellite receiver to the DIGITAL
COAXIAL IN 3, as shown, it's not necessary to
assign the digital input.
The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV
is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO
MONITOR OUT, use the AV receiver/AV amplifier's display when changing settings.
See the other side of this sheet for the Speaker hookup.
VIDEO 1
IN
Please ensure the monitor input
(VIDEO 1, VIDEO 2, VIDEO 3, etc.)
selected corresponds to actual
connection used.
L
Cable/
R
satellite
AUDIO Antenna input
OUT OUT (e.g..RF IN)
On the front panel
TUNING
PRESET
SETUP ENTER
TV
Coaxial feed from
TV antenna
If you are not using
Cable/satellite box,
please refer to the
instruction manual.