Siemens SIMATIC NET IE FC RJ45 Compact Operating Instructions page 21

2 Assembly
Follow these steps to assemble the IE FC RJ45 4x2 CAT 6A:
1. In the stripping tool (6GK1901-1GA00), use the green knife cassette (6GK1901-
1GB01) with 5.1 mm knife distance.
2. Measure approximately 10 cm of cable.
3. Place the cable in the stripping tool. Make sure that a length of approximately 10 cm
is stripped.
IE FC RJ45 Plug 4x2 CAT 6A
A5E34280610-AD, 01/2023
21