Canon Speedlite EL-5 Advanced User's Manual page 85

Contin flash ctrl
Set to [E-TTL each shot] to perform flash metering for each shot. Set to [E-TTL 1st
shot] to perform flash metering for only the first shot before continuous shooting. The
flash output level for the first shot is applied to all subsequent shots. Useful when
prioritizing continuous shooting speed without recomposing shots.
Slow synchro
You can set the flash-sync speed for flash photography in <
mode.
Flash mode
You can choose the flash mode from [E-TTL II flash metering], [Manual flash], or
[MULTI flash (stroboscopic)] to suit your desired flash photography.
Wireless functions
You can set up radio transmission wireless flash photography. For details, see
Transmission Wireless Flash
Flash zoom (flash coverage)
You can set the Speedlite flash coverage. Set to [Auto] for automatic configuration of
flash coverage to suit the lens focal length and image sensor size (
Shutter synchronization
As the flash firing timing/method, you can choose from [First-curtain synchronization],
[Second-curtain synchronization], or [High-speed synchronization]. For normal
flash photography, set to [First-curtain synchronization].
Flash exposure compensation
Just as exposure compensation is adjusted, you can also adjust flash output. The
amount of flash exposure compensation can be set in a range of ±3 stops, in 1/3-stop
increments.
Flash exposure bracketing
Enables automatic adjustment to different flash output levels as three shots are taken at
once. The setting range is ±3 stops, in 1/3-stop increments.
Clear settings
Select [Clear flash settings] or [Clear external flash set.] to restore Speedlite settings
to defaults.
Photography.
85
> (aperture-priority AE)
Radio
).