Table of Contents
Advertisement
11.
Take the picture.
Before shooting, confirm that the sender's <
green.
Shooting with the sender camera automatically activates shooting by
receiver cameras.
<
used in linked shooting.
Note
To cancel linked shooting, change the setting in step 2 to <
on each Speedlite.
This feature can be used for remote control of linked shooting even without
attaching the sender Speedlite to a camera. To fire from all receiver cameras, push
the sender joystick straight in, then press it vertically or horizontally or turn <
select <
>.
Auto power off takes effect in approx. 5 min. in linked shooting, for both senders
and receivers. If more time than this will pass between shots in linked shooting, set
auto power off to [OFF] on both senders and receivers (C.Fn-01-1).
Each Speedlite (senders and receivers) set to [0] in P.Fn-05 (
fully charged.
> appears on the LCD panel of receivers that were
143
> lamp is lit in
>
> to
) beeps after it is
Advertisement
Table of Contents
