Advertisement
Available languages
Available languages
Low water
1. Filter blockage
pressure
2. Inlet pressure not
LCD
1. The battery is
screen
does not
2. The display is exposed
display
Dial or
1. The dial/valve is stuck
button
2. Accidentally holding
problems
The timer
1. The dial turn to OFF
does not
water
2. The faucet is not
3. The battery is dead, it
4. Rain delay is ON
If you need help in using the timer, please feel free to contact us.
US Free Hotline(English): +1 833-381-5659
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch): +44 800-808-5337
(MON-FRI 9:00 AM-5:00 PM CET )
Email: service@rainpointus.com
WhatsApp: +1 626-780-5952
sufficient to
support
watering needs
exhausted
to direct sunlight
the OK button while
inserts the batteries
position
turned on
shuts down
automatically
1. Check if the filter is
clogged, if so, clean
or replace the filter.
2. Make sure the timer is
installed properly and
not cross-threaded.
3. Installation of a booster
pump or other auxiliary
equipment of increasing
pressure.
1. Replace new 2*AAA
alkaline batteries and
installed correctly.
2. Avoid direct sunlight,
and observe if the
battery is too low.
1. Same procedure as
above.
2. Turn the dial to the OFF
to check if the valve
can be closed.
1. Rotate the dial to ON
position.
2. After finishing all
settings, turn on the
faucet.
3. Replace with new
alkaline batteries.
4. Waiting for the plan to
resume again.
- 21 -
Advertisement
