EVERSPRING AN183 Installation Instructions

AN183 Smart Plug
Installation Instructions
General Introduction
AN183 Smart Plug is a home automation devicedesigned to control the On / Off
status of home electronic devices. AN183 can measure the connected load power
for electricity usage monitoring applications and is able to detect overload condition
and turn off the load, preventing fire hazard.
Product Overview
On/Off button
& LED Indicator
Plug Type
AN183 comes in German plug and French plug versions.
AN183-2 AN183-6
German plug French plug
Side
view
1
Binding with VIAS
1. Do not insert the plug into an electrical outlet yet.
2. Log into the VIAS APP.
3. Select "System", then "Add a Device",
4. Plug the Smart Plug into an electrical outlet. There is no need to press On/Off
button to make the auto-inclusion at first time.
5. Time-out will occur if the binding process was unsuccessful. Please refer to the
"Manual binding" on the wizard.
Operation on VIAS APP
Front
Look for the sensor in Room/Device list, press and hold the sensor icon for 2 sec to
enter the sensor information page to assign the sensor into different rooms.
view