Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45045-01
20090126
©2009 Hunter Fan Co.
Type F Models
Type F Models
Type F Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter F
Summary of Contents for Hunter F
- Page 1 Type F Models Type F Models Type F Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not 11 • Operating and Cleaning Your Fan..15 use a solid-state speed control with this fan. Use only Hunter speed 12 • Troubleshooting ......... 16 controls. - Page 3 Understanding Mounting and Installer’ s Choice® Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
(Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Allen Wrench 45045-01 • 01/26/09 • Hunter Fan Company... - Page 7 WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-8 – 3-9 Low Profile Washer Step 3-7 (Detail) Low Profile Washer Adapter Canopy Trim Ring #8-32 x 3/4” Screw Step 3-10 45045-01 • 01/26/09 • Hunter Fan Company...
-
Page 8: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 9: Installing The Canopy And Canopy Trim Ring
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 10: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. -
Page 11: Installing The Switch Housing
Install the remaining #6-32 x 3/8” screw into the housing. Tighten all three screws firmly. Steps 7-1 – 7-3 Housing Upper Assembly Switch Screw Housing Step 7-4 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 12: Setting The Remote Transmitter And Receiver
CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. -
Page 13: Completing Your Installation
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 1/2” housing assembly screws. Steps 9-1 – 9-2 Lower Switch Housing Plug Connector Detail Housing Assembly Screw 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 14: Operating The Remote Control And Mounting The Holder
10-6. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Steps 10-1 – 10-4 Step 10-5 Step 10-6 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 15: Operating And Cleaning Your Fan
Occasionally, apply a light coat of furniture polish for added protection and beauty. Clean painted and high-gloss blades in the same manner as the fan finish. In cold weather, use upward air flow pattern 45045-01 • 01/26/09 • Hunter Fan Company... -
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. Memphis, Tennessee 38016 45045-01 • 01/26/09 • Hunter Fan Company...
Need help?
Do you have a question about the F and is the answer not in the manual?
Questions and answers