Advertisement
Available languages
Available languages
Fermenting
beverages
provides brewers with the ability to reduce
unwanted esters and speed up fermentation
times with the capacity to ferment at higher
To control the tank's internal pressure,
brewers will need to attach our spunding valve
gas disconnect (part 7797) or premium plastic
the adjustable valve to your desired pressure,
then attach the disconnect to the gas post
of the tank's pressure lid. The gas post is
help differentiate it from the liquid post.
Your liquid post should have the silicone dip
MCH Australia P/L Trading as Keg
FERMENTATION TIPS
under
pressure
tank. You are now able to hold pressure
within your tank while releasing excess
pressure. If your gauge indicates a slightly
different pressure than your desired setting,
you can easily readjust the valve pressure.
We recommend 5 to 10psi on ales and
15psi on lagers.
Be careful when releasing pressure on any
beer still fermenting under pressure. The
the fermenting beer's krausen (foam) and
could potentially clog your PRV and gas
post dip tube.
CONTACT US
King
48 Smith Road
Springvale VIC 3171
Australia
Advertisement
