Page 1
Apollo Snub Nose User Manual APOLLO SNUB NOSE 30L & 60L P.E.T. Pressure Fermenters User Instruction Manual https://www.kegking.com.au Last Update: 21 February 2023 Keg King is a registered business name of MCH Australia Pty Ltd...
Page 2
If you connect to an external pressure source; ensure it has an independent pressure release valve (PRV). ONLY use the WHITE, Purple or Blue PRV supplied by Keg King on the pressure lid DO NOT use the tank under pressure if it has been physically damaged e.g.
Page 3
Fermentation ................................7 Gen 3 Cooling Coils ..............................8 Gen 3 CIP Cleaning Kit .............................. 8 Gen 3 Cleaning Kit Operation..........................8 Storage ..................................8 https://www.kegking.com.au Page 3 of 8 Keg King is a registered business name of MCH Australia Pty Ltd...
Page 4
Check the resellers map on our website to find where our products are available in North America, UK, EU, Aus, NZ and South Africa. https://www.kegking.com.au/retailers Since 2009, Keg King’s mission is to make the best brewing & dispensing equipment in the world! Check out our helpful instructional videos on the Keg King YouTube Channel https://www.youtube.com/c/KegKingvideos Enjoy your Apollo P.E.T.
Page 5
Pressure-rated at 5 bar • Large opening for handling and cleaning • Available in 30 and 60 Litre, UniTank or Snub Nose varieties https://www.kegking.com.au Page 5 of 8 Keg King is a registered business name of MCH Australia Pty Ltd...
Page 6
7. Screw the thermowell rod onto the bottom thread of the lid. 8. Screw on the neck ring to firmly hold down the lid assembly. https://www.kegking.com.au Page 6 of 8 Keg King is a registered business name of MCH Australia Pty Ltd...
Page 7
After pitching in the yeast, close up the tank and ferment with controlled temperature and pressure. To control Apollo’s internal pressure, we recommend attaching the Keg King spunding valve (9161) to an MFL gas ball lock disconnect (8282 for plastic, 7797 for stainless steel) and affixing the spunding valve set up to the gas ball lock post on the Apollo lid.
Page 8
We recommend pressurising the tank to 10 psi and storing in a cool room away from sunlight. This ensures that your tank stays free from oxygen and bacteria for up to 2 weeks. https://www.kegking.com.au Page 8 of 8 Keg King is a registered business name of MCH Australia Pty Ltd...
Need help?
Do you have a question about the APOLLO SNUB NOSE and is the answer not in the manual?
Questions and answers