Installazione; Installation - Indiana Line Basso 840 Manual

Hide thumbs Also See for Basso 840:
Table of Contents

Advertisement

Effettuare tutti i collegamenti prima di allacciare il cavo di rete.
All connections have to be made before the power cord is plugged in the socket.
Minden csatlakoztatást a konnektorba való bekötés előtt végezzen el.
Se l'amplificatore è dotato di uscita di segnale mono per subwoofer, collegatela con un cavo schermato
a LINE INPUT LFE/SUB. Utilizzando questo ingresso il CROSSOVER non è attivo.
Se l'amplificatore è dotato di uscite di se-gnale stereo, collegatele con un cavo scher-mato (RCA) a
LINE INPUT L R, rispettando i canali "L" e "R". Utilizzando questo ingresso il CROSSOVER è
attivo.
If the amplifier is equipped with subwoofer mono signal output, link it by using a shielded cable to the
LINE INPUT LFE/SUB. Using this input, the CROSSOVER do not works.
If the amplifier is equipped with stereo sig-nal outputs, link them by using a shielded cable (RCA) to
the LINE INPUT L R, keeping the "L" and "R" channels. Using this input, the CROSSOVER is
working.
Ha az erősítő rendelkezik mono mélysugárzó jelkimenettel, csatlakoztassa azt egy árnyékolt kábel
segítségével a LINE INPUT LFE/SUB bemenethez. Ezt a bemenetet használva a CROSSOVER nem
működik.
Ha az erősítő sztereó jelkimenettel van felszerelve, akkor egy árnyékolt kábel (RCA) segítségével kösse
össze őket a LINE INPUT L R-rel, megtartva az "L" és "R" csatornákat. Ezt a bemenetet használva a
CROSSOVER működik.
Se l'amplificatore è dotato solo di uscite per i diffusori, collegate i morsetti HIGH INPUT del
subwoofer all'uscita per altoparlanti del-l'amplificatore stesso (in parallelo alle casse) rispettando le
polarità ed i canali "L" e "R".
If the amplifier is equipped only with the outputs for loudspeakers, connect the HIGH INPUT
terminals to the speaker outputs of the amplifier (parallel coupling the speakers) keeping polarity and
"L" and "R" channels.
Ha az erősítő csak hangsugárzó kimenetekkel rendelkezik, akkor kösse össze a HIGH INPUT aljzatot
az erősítő hangsugárzó kimeneteivel (hangsugárzók párhuzamos kapcsolása) a polaritás
és az "L" és "R" csatornák megtartásával.

INSTALLAZIONE

INSTALLATION

BEÜZEMELÉS


Advertisement

Table of Contents
loading

Table of Contents