Front Panel; Front & Rear Panels - Onkyo HT-R520 Instruction Manual

HT-R520_En.book Page 6 Monday, March 15, 2004 2:47 PM
Front & Rear Panels

Front Panel

1
STANDBY/ON
A SPEAKERS B
PHONES
L M
For detailed information, refer to the pages in
parenthesis.
A
STANDBY/ON button (31)
This button is used to set the HT-R520 to On or
Standby.
B
STANDBY indicator (31)
This indicator lights up when the HT-R520 is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
C
STEREO button (39)
This button is used to select the Stereo listening
mode.
D
LISTENING MODE [
These buttons are used to select the listening modes.
E
DISPLAY button (33)
This button is used to display various information
about the currently selected source.
F
DIGITAL INPUT button (31, 45)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
G
Display
H
Remote control sensor (9)
This sensor receives control signals from the remote
controller.
I
Arrow buttons
These buttons are used to select and adjust settings.
TUNING [ ] [ ] buttons
These buttons are used to tune into radio stations.
PRESET [ ] [ ] buttons
These buttons are used to select radio presets.
J
ENTER button
This button is used to confirm settings.
6
2 3 4 5 6
STANDBY
LISTENING
TONE STEREO MODE DISPLAY DIGITAL INPUT
MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO
VCR
N O P
] [ ] buttons (39)
7 8 9 J
TUNING
PRESET
ENTER
SETUP RETURN
MEMORY TUNING MODE
CLEAR
3 TAPE TUNER C D
S VIDEO
Q R S T
K
MASTER VOLUME control (32)
This control is used to set the volume of the
HT-R520.
L
SPEAKER A & B buttons (32)
These buttons are used to turn speaker sets A and B
on and off.
M
PHONES jack (37)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
N
TONE, [–] & [+] buttons (36)
These buttons are used to adjust the bass and treble.
O
MULTI CH button (33)
This button is used to select the multichannel DVD
input.
P
Input selector buttons (31, 32, 43)
These buttons are used to select the input sources.
Q
MEMORY button (34, 35)
This button is used to preset radio stations.
R
TUNING MODE button (34)
This button is used to select the Auto or Manual
Tuning mode.
S
SETUP button
This button is used to access various settings.
T
RETURN button
This button is used to return to the previous screen
when changing settings.
U
VIDEO 3 INPUT (27)
These S-Video, composite video, and analog audio
inputs can be used to connect a camcorder or games
console.
K
MASTER VOLUME
3 INPUT
VIDEO
VIDEO L R
AUDIO
HT-R520
U