Onkyo HT-R500 Instruction Manual page 31

Enjoying the listening modes
The input sources and available listening mode
The listening modes that can be selected are variable depending on
the signal formats employed with the input sources.
Notes
• Only "Stereo" ("Stereo" or "Direct" for PCM/Analog source)
can be selected when the speaker configuration is set to
"Speaker 2ch", when headphones are used, or when speakers B
is selected.
• The listening mode cannot be selected when "Multich" is
selected.
• You can select "Orchestra", "Unplugged", "Studio-Mix" and
"TV Logic" only when the speaker configuration is set to
"Speaker 4ch" or "Speaker 5ch".
• If you select "Orchestra", no sound is reproduced from the
center speaker even when the speaker configuration is set to
"Speaker 5ch".
Input source Analog
signal format
Source software
Listening mode Video cassette tape
Direct
Stereo
PL II Movie
PL II Music
Dolby D
DTS
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch St
* 1 Only Stereo or Direct can be selected when the PCM source has been recorded with a sampling rate 96 kHz.
2
* If you have an LD player with AC-RF output, connect it via a AC-RF demodulator to one of the HT-R500's DIGITAL INPUT terminals.
PCM* 1
Tape, CD, Video CD,
FM/AM DVD Video,
DVD Audio
G G
G G
G G
G G
G G
G G
G G
G G
G G
Dolby Digital
*2
DVD video, LD
Multi channel Stereo
G G
G
G
G
DTS
CD
DVD Video,
LD* 2
G
G
31