Onkyo HT-R500 Instruction Manual page 9

Index to parts and controls
Remote controller
1
2
3
4
5
6
7
8
9
Explanations on this page are for controlling the HT-R500. To
operate other components, see "Using the remote controller" on
pages 34 through 35, and "Pre-programming remote controller" on
0
pages 36 and 37.
-
For operational instructions, refer to the page indicated in brackets.
1
For setting the sleep time.
= This button is provided only on the remote controller.
2
Turns on the HT-R500 or put it in standby.
~
3
!
@ Press to change the listening mode.
4
Press to activate/de-activate Cinema Filter function.
5
Press to change the late night setting.
6
#
For setting the output levels for each speaker.
These buttons are provided only on the remote controller.
7
Press to select an audio input signal format.
8
For selecting the input source.
9
Activates the mute function.
This button is provided only on the remote controller.
0
For selecting a tuner preset channel.
-
For adjusting the brightness of the front display.
=
For selecting the component to be operated by the remote
controller.
~
Press to switch the speaker systems.
!
Press to adjust bass, treble, late night function and cinema filter
function setting.
@
Press to adjust the values and parameters of the mode selected
using the AUDIO ADJUST, SPEAKER ADJUST or AUDIO
SELECTOR button.
#
For adjusting the volume.
SLEEP button [27]
STANDBY/ON button [17]
Listening mode buttons [32]
CINE FLTR button [29]
LATE NIGHT button [29]
TEST/CH SEL/LEVEL 5/∞ buttons [20, 28]
AUDIO SEL button [28]
INPUT SELECTOR buttons [21-25, 28, 33]
MUTING button [26]
PRESET 2/3 button [25]
DIMMER button [27]
Mode buttons [34-37]
SP A/SP B buttons [21, 26]
AUDIO ADJUST button [29]
ADJUST 2/3 button [29]
VOLUME 5/∞ button [21, 24]
9