Contents Wireless Connectivity ..........22 Safety Information ........... 2 Wake ON ............... 23 Markings on the Product.......... 2 Wireless Display ............ 24 Environmental Information........3 Connectivity Troubleshooting ........ 24 Features ..............3 Accessories Included..........4 Using Audio Video Sharing Network Service ..24 Standby Notifications ..........
� Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. � Do not place the TV on the floor and inclined CAUTION surfaces. � To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK out of the reach of the babies, children and domestic DO NOT OPEN...
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard � Read the instructions before mounting your TV This product or the accessories supplied with the on the wall. product may contain a coin/button cell battery. If the �...
� OSD menu system be cancelled. You can enable this function again by changing the setting of the Auto TV OFF option from � Stereo sound system the Settings>System>More menu. � Teletext TV Control Switch & Operation � Headphone connection �...
It is not possible to set timers for two or more events Using Main TV Menu that will broadcasted in different channels at the same When the Home button is pressed, the main TV time interval. In this case you will be asked to choose menu will appear at the bottom of the screen.
Antenna Connection Disposal Information Connect the aerial or cable TV plug to the AERIAL [European Union] INPUT (ANT-TV) socket located on the rear side of These symbols indicate that the electrical and the TV. electronic equipment and the battery with this symbol Rear side of the TV should not be disposed of as general household waste at its end-of-life.
Standby: Switches On / Off the TV Remote Control Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. Language: Switches among sound modes (an- alogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available) Mute: Completely turns off the volume of the TV �.
Connections See the illustrations on the left Connector Type Cables Device side. You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You cannot use VGA and YPbPr at the same time. To Connection enable PC/YPbPr audio, you will (back) need to use the back audio inputs with a YPbPr/PC audio cable for...
policy or its enforcement, please contact by email at Switching On/Off smarttvsecurity@vosshub.com. To Switch the TV On H�ghl�ght Next and press OK button on the remote Connect the power cord to a power source such as a control to continue and the Network/Internet Settings wall socket (220-240V AC, 50 Hz).
Media Playback via USB Input Loop/Shuffle Mode Operation You can connect 2.5” and 3.5” inch (HDD with external power supply) external hard disk drives or USB memory stick to your All files in the list will be continuously played in TV by using the USB inputs of the TV.
When ARC is active, the TV does not mute its other audio outputs automatically. You will need to decrease TV volume to zero manually if you wish to hear the ARC audio only (same as optical or co-axial digital audio outputs). If you want to change connected device’s volume level, you should select that device from the source list.
Settings Menu Contents Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
Page 15
Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
Page 16
Installation Menu Contents Automatic channel Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations. scan (Retune) Analogue: Searches and stores analogue stations. Manual channel This feature can be used for direct broadcast entry. scan Network channel Searches for the linked channels in the broadcast system. D. Aerial: Searches for scan aerial network channels.
Page 17
More Displays other setting options of the TV. Menu Timeout Changes timeout duration for menu screens. Standby LED If set as Off the standby LED will not light up when the TV is in standby mode. Software Ensures that your TV has the latest firmware. Press OK to see the menu options. Upgrade Application Displays current software version.
Internet Lock: If this option is set to ON, the internet General TV Operation using applications will be disabled. Set to OFF to Using the Channel List release these applications again. The TV sorts all stored stations in the channel list. You Set PIN: Defines a new PIN number.
Zoom: Highlight and press OK to see events in a MHEG Teletext wider time interval. With digital terrestrial broadcasting (DVB-T), in addition Now/Next Schedule to pictures and sound, you can also view digital teletext. In this layout option, only the current and next events Digital teletext is sometimes broadcast at the same of the listed channels will be displayed.
� Are suitable plugs used to connect the antenna? AV and HDMI Signal Compatibility � If you are in doubt, consult your dealer. Source Supported Signals Available No sound � Check if the TV sound is muted. Press the Mute SECAM button or increase the volume to check.
Internet Speed Test Connectivity Highlight Internet Speed Test and press the OK Wired Connectivity button. TV will check the internet connection bandwidth To Connect to a Wired Network and display the result when complete. � You must have a modem/router connected to an Advanced Settings act�ve broadband connect�on.
� The locat�on where the transm�ss�on �s most effect�ve Connect your TV to your router follow�ng the steps d�ffers depend�ng on the usage env�ronment. ment�oned �n the sect�ons above. Afterwards, connect your mob�le dev�ce to the router � The W�reless feature of the TV supports ��2.�� a,b,g and then act�vate the shar�ng software on your mob�le �...
Internet Connection Not Available / Aud�o V�deo Wireless Display Shar�ng Not Working Wireless Display is a standard for streaming video and If the �AC address (a un�que �dent�f�er number) of your sound content. This feature provides the ability to use PC or modem has been permanently reg�stered, �t �s your TV as wireless display device.
Refer to the Media Browser menu section for further Catch-up contents can also be accessed and played information on file playback. back directly from the TV Guide. Refer to the section Electronic Programme Guide for more information. If a problem occurs with the network, switch your Requirements television off at the wall socket and back on again.
Enter keyword/s into the search/address bar and will be displayed and you can choose your desired highlight the Submit button on the virtual keyboard channel to be replaced. and press the OK button to start a search for the TV: You can watch content through the TV tab. In related websites.
to Facebook and twitter pages of the programme Requirements selected. Smart TV CAST&CREW: Shows all the people contributed to Network connection the current programme. Mobile Device based on Android or iOS platform VIDEOS: Provides videos on YouTube related to the (Android OS 4.0 or higher;...
� Examples about the use of the feature will be DVB functionality information displayed on the next screen. Press OK to finish This DVB receiver is only suitable for use in the country the setup. which it was designed to be used in. Once the setup is complete, you will be able to control Although this DVB receiver conforms to the latest DVB the functions of your TV with Alexa.
� Do not expose the disc to direct sunlight or heat General Playback sources such as hot air ducts, or leave it in a car Basic Play parked in direct sunlight as the temperature can rise Press the Standby button quickly and damage the disc.
appears on upper-left corner of screen. 13. Slide Show is disabled when the ZOOM mode is on. DVD Troubleshooting Poor picture quality (DVD) � Make sure the DVD disc surface is not damaged. (Scratch, fingerprint etc.) � Clean the DVD disc and try again. See instructions described in “Notes on Discs”...
Disc Types Compatible with This Unit Disc Types Recording Disc Max. Playing Characteristics Types Size Time (Logos) � DVD contains excellent sound and video Single- Audio due to Dolby Digital and MPEG-2 System. sided; 240 min. 12 cm � Various screen and audio functions can Double- be easily selected through the on screen Video...
Page 33
Overview of the Remote Control Standby Numeric buttons Audio language selection Mute �. Volume Up / Down TV Menu DVD Menu Navigation buttons OK / Select 10. Back / Previous menu 11. Coloured buttons; Red button - Zoom Green button - Repeat Yellow button - Root Blue button - Title 12.
Page 34
General DVD Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons DVD Playback Mo��e Playback P�cture Playback Mus�c Playback Play Play...
Important Instructions For your own safety read the following instructions carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN &...
Need help?
Do you have a question about the JB-32DVD1811SMS and is the answer not in the manual?
Questions and answers