Table of Contents
Advertisement
5. INTRODUCTION
5.1
DESCRIPTION OF THE CO2 DOMINATOR AND ITS USAGE
The CO2 Dominator is a device specifically designed for producing cryogenic fog plumes as a special
effect on a stage. The CO2 Dominator is intended solely to be placed on a flat surface or stage and
produce brief upward cryogenic fog plumes of CO2.
Should you use the equipment in any way other than just described then you release your supplier
from all liability.
The CO2 Dominator has 5 output pipes which can be installed in different directions. The CO2
Dominator is DMX controllable. One address is used as a safety channel and five other addresses to
control every output individually.
The CO2 Dominator has a large number of safety features and components that are discussed later in
this manual. Read this manual carefully in its entirety before you start working with the CO2
Dominator.
5.2
NECESSARY ACCESSORIES
The following parts are required with the CO2 Dominator:
Manual
MFX1155 – PRESSURE HOSE 3/4
Table 5.1
MFX0308 – POWER CABLE
MFX1151 – PRESSURE HOSE 3/8
Version 1.1
MFX1154 – DISTRIBUTOR BLOCK
4 BOTTLES CO2 (LIQUID)
Page 6
Advertisement
Table of Contents
