Your Hercules Wifi Extender; Recommendations; Specifications - Hercules HWGEXT-54 User Manual

Table of Contents

Advertisement

Hercules HWGEXT-54

1. YOUR HERCULES WIFI EXTENDER

Hercules is proud to present the Hercules WiFi Extender, a device that will literally extend your sensation of
wireless freedom. When ideally positioned in your home, it will bridge distances and get around obstacles
which used to limit wireless communication between your computers, sharing your Internet access, your
devices or your data.
Great care has been taken in designing your product. Both simple to operate and user-friendly, it is well
suited to beginners and advanced users alike.
And now, it's time to learn about your new product and join in the Wireless Attitude

1.1. Recommendations

- Never open up your Hercules WiFi Extender, as you risk damaging its internal components.
- In order to avoid the risk of fire or electrical discharge, keep your WiFi Extender away from:
- rain or humidity, as well as all fluids (water, chemical products and any other liquids),
- sources of heat such as heaters, stoves and any other heat-producing devices (including amplifiers),
- direct sunlight.
- Do not cover your WiFi Extender.
- Unplug the WiFi Extender's power cable if you do not plan on using it again for an extended period of time.
To unplug the power cable, take hold of and pull on the plug. Never pull on the cable itself.
- Disconnect the WiFi Extender before cleaning. Use a soft cloth for cleaning and avoid using aerosol
cleaners.
- The device must be powered using the included power adapter only. The power adapter must remain easily
accessible when plugged in.
- This device is intended for use in a temperate environment.

1.2. Specifications

The Hercules WiFi Extender is equipped with two functionalities: (1) WiFi extender, (2) wireless WiFi
access point.
802.11g
wireless
access point
RF specification: frequency band = 2400-2483.5MHz
Maximum transmission power: 100mW
1 adjustable external antenna
1 RJ-45 connector for a LAN Ethernet 10/100Mbps connection
Security functions: WEP/WPA-PSK/WPA2-PSK/Mixed WPA-WPA2, filtering by
External DC power, input: 120~240VAC, 50/60Hz, output: 12VDC / 0.5A
Green LEDs on front face
Firmware (software) update via Ethernet port
4/104 – User Manual
!
TM
802.11g
MAC address

Advertisement

Table of Contents
loading

Table of Contents