Step 5: Powering On And Connection To Your Computer (Wifi Extender Mode); Wifi Connection Of The Hercules Wifi Extender To Your Router Via Quickaccess - Hercules HWGEXT-54 User Manual

Hercules HWGEXT-54
2.3.5. Step 5: POWERING ON AND CONNECTION TO YOUR
COMPUTER (WiFi Extender Mode)
- Connect the Hercules WiFi Extender's power cable to the power plug  and plug the power adapter into
an electrical outlet located near your main computer and your modem router.
The power LED lights up.
- Connect the included black Ethernet cable to the
Ethernet (RJ-45) port on your computer's network adapter.
The Ethernet port LED lights up.
- Click Continue.
2.3.6. WiFi connection of the Hercules WiFi Extender to your
router via QuickAccess
The Hercules QuickAccess utility is launched automatically, allowing you to configure your Hercules WiFi
Extender.
If you have enabled the Access Manager in your Web browser in order to control access to certain
sites which may offer contents of a violent or otherwise undesirable nature, you will not be able to immediately
connect to WiFi Extender Manager.
When launching QuickAccess, the Access Manager will prompt you for authorization to visit the website
http://192.168.178.200. This site corresponds to the WiFi Extender Manager interface associated with your
Hercules WiFi Extender. To access it, simply accept the authorization to display this site. The WiFi
Extender's address will be stored in your Web browser, and thereafter you will be able to directly access WiFi
Extender Manager.
12/104 – User Manual
Ethernet port  on the Hercules WiFi Extender and the