Table of Contents
Advertisement
N ot e s
• When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc in the tray.
• Depending on the DVD or VIDEO CD, some
operations may be prohibited.
• VIDEO CDs cannot be viewed slowly or frame by
frame in the reverse direction.
• Resume Play may not be available depending on the
disc.
• Resume Play is not available in Shuffle or Program
Play mode.
• Depending on where you stopped the disc, the
player may resume playback from a different point.
• The point where you stopped playing is cleared
when:
– you open or close the disc tray
– you disconnect the AC power cord
– you change the play mode
– you start playback after selecting a title, chapter,
or track
– you change the settings of "DVD MENU",
"AUDIO", or "SUBTITLE" in "LANGUAGE
SETUP" in the setup display.
– you change the settings of "TV TYPE" in
"SCREEN SETUP" in the setup display
– you change the settings of "PARENTAL
CONTROL" in "CUSTOM SETUP" in the
setup display
– you select another disc.
• When "DVD" is selected as the function, you
cannot use Dolby Pro Logic Surround sound and
the DSP surround effects.
• When recording, the indicator on the MULTI/2CH
button is turned off automatically.
• Under the following circumstances, 2CH is
automatically selected and the indicator on the
MULTI/2CH button turns off.
– When recording.
– When TAPE B is in REC PAUSE mode.
– When recording using TAPE B.
• When using headphones, the sound from
headphones is 2 channel.
• Switch the channel mode to 2CH by pressing
MULTI/2CH when making an analog recording
using a component connected to the MD OUT jacks
on this unit. There is no audio output from the MD
OUT jacks in the multi channel mode.
• Depending on the DVD, digital recording may not
be done. In this case, perform analog recording.
Press MULTI/2CH to switch the channel mode to
2CH on this system when making an analog
recording.
Downloaded from:
https://www.usersmanualguide.com/
27
Advertisement
Table of Contents
