Turning On & Basic Operations; Turning On/Off The Av Receiver; Turning On; Turning Off - Onkyo HT-S3400 User Manual

Turning On & Basic Operations

Turning On/Off the AV Receiver

8ON/STANDBY

Turning On

1
Press 8 ON/STANDBY on the front panel.
or
Press RECEIVER followed by 9 ON/STANDBY on the remote controller.
The AV receiver comes on, the display lights.

Turning Off

1
Press 8 ON/STANDBY on the front panel.
or
Press RECEIVER followed by 9 ON/STANDBY on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always
turn down the volume before you turn it off.
Tip
• See "Auto Standby" about a power management setting
9 ON/STANDBY
RECEIVER
page 34).
(➔
En
17