Fnirsi HS-01 User Manual page 22

Intelligent electric soldering iron
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 16
● Temperature calibration: When entering the setting mode, short press the left and right keys to switch to the temperature
calibration
Birghtness
Temp Unit
Calibrate
any key to exit. Under the home page, set the target temperature as 350 ℃. After the temperature is stable, use the soldering
iron thermometer to measure the actual temperature, record the difference between the target temperature and the actual
temperature (positive or negative), and fill the difference into this item in the menu.
●Temperature unit: In the setting mode, short press the left and right keys to switch to the temperature unit
long press the right key to enter,
●Sleep time: In the setting mode, short press the left and right keys to switch to the sleep time
long press the right key to enter
press any key to exit. The default sleep time is 20 minutes, and the setting range is 1-20 minutes. When it is set to the
maximum, short press to turn off the sleep.
●Sleep temperature:In the setting mode, short press the left and right keys to switch to the sleep temperature
long press the right key to enter,
press any key to exit. When the working temperature is lower than the sleep temperature, the working temperature is
maintained in the sleep state, and when the working temperature is higher than the sleep temperature, the temperature will
drop to the sleep temperature in the sleep state.
●Child lock mode: In the setting mode, short press the left and right keys to switch to the child lock mode
long press the right key to enter
completed. After the child lock mode is turned on, when the power is turned on again, the button with a lock icon will be
displayed
, long press the right keys to enter
and the left and right keys switch, and long press any key to exit.
F
,Left and right keys to adjust,after the adjustment is completed, long
1
20 OFF
and adjust the left and right keys. After the adjustment is completed, long
150
80
200
, switch left and right , and long press any key to exit after the switch is
Open
Close
.At this time, it is necessary to press the left button 3 times continuously to heat up.
, the left and right keys to adjust, long press
3 0
-50
50
16
Calibrate
Temp Unit
, and
Sleep Time
Temp Unit
Sleep Temp
Sleep Temp
Sleep Time
Sleep Temp
Child Lock
,
Sleep Time
,
Child Loc
,
Language

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HS-01 and is the answer not in the manual?

Related Products for Fnirsi HS-01

Table of Contents

Save PDF